Il dispositivo Ermete è una piattaforma telematica evoluta con Linux O.S. per applicazioni di telemetria e diagnostica in tempo reale per uso veicolare.
L’elevata flessibilità di configurazione personalizzata in base alle esigenze dell’applicazione permette il raggiungimento di elevati livelli di performance nella fase sperimentale e posiziona Ermete nella fascia alta dei dispositivi di diagnostica e telemetria.
Ermete permette alle aziende di raccogliere i dati di diagnostica e telemetria da veicoli realmente operanti dislocati nel mondo, senza la necessità di essere sul campo velocizzando le fasi di testing e ottenendo una quantità di dati senza precedenti.
– processing unit based on Freescale Cortex A9 iMX6 up to 1GHz quad core |
– DDR3 memory up to 4GB @ 64bit |
– non-volatile eMMC memory on-board, for operating up to 64GB |
– vehicle-side interfaces for monitoring, diagnostic and 3rd parts vehicle devices |
– 6 high speed CAN lines 1Mbps |
– 1 B-CAN lines,125kbps fault tolerant |
– 3 K lines |
– 1 RS232 complete line (8 wires) |
– 1 RS232 minimal line (2 wires) |
– 1 RS485 line |
– 1 serial line for tachograph |
– 8 configurable GPIO |
– 3 wake-up inputs |
– 2 high-side outputs |
– 1 microphone input or speaker output |
– 1 USB 2.0 host |
– 1 Ethernet 10/100 |
– user-side connector for maintenance and user interface connection |
– auxiliary power supply |
– 1 HDMI full-HD |
– 1 Ethernet Gigabit |
– 3 USB 2.0 host |
– 1 USB 2.0 OTG port optically isolated (used in device mode) |
– 1 Comm over Usb (used for debug console) |
– communication interfaces for vehicle localization and other radio connections |
– GPS with dead-reckoning |
– UMTS and CDMA modem / LTE modem |
– WiFi |
– Bluetooth |
– Easy access to sim insertion and removal |
– Internal peripherals for diagnostics and added value features: |
– digital accelerometer |
– digital Magnetometer |
– digital gyroscope |
– buzzer |
– uSD slot with easy access |
– user diagnostic info trough a LED matrix and graphic display |
– real time clock (RTC) with battery-powered backup |
– connector for future expansion, with reconfigurable FPGA pins |
– wake-up source management (GPIO, CAN, modem, RTC, accelerometer, tachograph, LAN) |
– backup battery (500mAh min.) able to ensure the proper system shutdown |
– non-isolated automotive power supply (8-36V) with auxiliary input |
– operating temperature -20÷65°C |
– moisture range 10÷90% non-condensing |
– cooling system based on natural dissipation through the case (fanless) |
– dedicated plastic/aluminum case |
– all the system devices are in range industrial, or automotive where available |
Click to download the compliances